Connect The Power Cord - Visioneer PATRIOT D40 User Manual

®
V P D40
ISIONEER ATRIOT
4. Open the automatic document feeder cover and remove any tape or protective foam from inside the feeder.
Close the feeder cover when you are finished.
The above illustrations are for example purposes only. Your scanner's packaging may vary slightly.
5. Slide the release switch in the output tray if you want it to lay flat on the desk.
C P
ONNECT THE OWER
Note: Only use the power supply (DA-48M24 made by APD) included with your scanner. Connecting any other
type of power supply may damage your scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
6
C
ORD
S S
CANNER ETUP
S U ' G
CANNER SER S UIDE