Snmp Commands - D-Link DAP-3220 Reference Manual

Command
get snmp Display SNMP Agent Status
set snmp Set SNMP State
snmp adduser Add User To SNMP Agent
snmp deluser Delete User From SNMP Agent
snmp showuser Show User list In SNMP Agent
snmp setauthkey Set User Auth Key
snmp setprivkey Set User Private Key
snmp addgroup Add User Group
snmp delgroup Delete User Group
snmp showgroup Show SNMP Group Settings
snmp addview Add User View
snmp delview Delete User View
snmp showview Show User View
802.11 b/g Access Point Command Line Interface Manual
Function
22
11
Syntax
get snmp
set snmp [disable:enable]
snmp adduser <Username> <GroupName> [AuthProtocl] [Authkey]
[PrivProtocl] [PrivKey]
Explanation:
AuthProtocl: 1 Non, 2 MD5, 3 SHA
Autheky: Keystring or none
PrivProtocl:1 none, 2 DES
PrivKey: Key string or none
snmp deluser <username>
snmp showuser
snmp setauthkey <username> <Authkey>
snmp setauthkey <username> <Privkey>
snmp addgroup <GroupName>
<WriteView> <NotifyView>
Explanation:
Security Level:1 no_auth no_priv, 2 auth no_priv, 3 auth priv
ReadView: <string> or NULL for None
WriteView: <string> or NULL for None
NotifyView: <string> or NULL for None
snmp delgroup <GroupName >
snmp showgroup
snmp addview <ViewName> <OID > [Type]
Explanation:
ViewName: <string>
OID:<string>
Type:1: included, 2: excluded
snmp delview <ViewName> <OID >
Explanation:
ViewName: <string>
OID: <string> or all for all OID
snmp showview
S C
NMP OMMANDS
[Security Level] <ReadView>