Page 1
LS 514N D e l u x e F l a t t o I n c l i n e B e n c h Assembly Instructions / Owners Manual Important: Read all assembly instructions and safety precautions before using this product.
Table of Contents Reference Page Hardware Reference Chart Parts Reference Product Exploded view Assembly Prep Assembly Instructions Preventative Maintenance Important Precautions Warning: To reduce the risk of injury, please read the following precautions before assembling or using your new product. 1.
Parts Reference Assembly Parts Item # Part # Description Qty. P20-3555 Seat Adjustment P20-3556 Back Adjustment P20-3525 Rear Stabilizer P20-3524 Main Frame P20-3502 Front Stabilizer P07-0470 Seat Pad P07-0469 Back Pad Carriage Bolt 1/2” x 2 3/4”L DA9E01223413NU Button Head Allen Screw 1/2” x 5”L DAEE01250013NU Button Head Allen Screw 1/2”...
Assembly Instructions Product Assembly Assembly Prep: Important: To ensure ease of product assembly, please verify the size and quantity of all the required assembly hardware by referencing the enclosed parts list and hardware chart. The assembly process has been broken down into easy to follow stages. Please read and review all instructions carefully.
Page 7
Assembly Instructions Assembly Stage 1 Attach Main Frame to the Base Stabilizers Assembly Hardware Required: Carriage Bolt Qty. 4 #13 Flat Washer Qty. 8 Button Head Allen Screw Qty. 2 #15 Nylon Nut Qty. 6 Assembly Description: A) Attach the Main Frame (#4) to the Rear Stabilizer (#3) and Front Stabilizer (#5) using 4- Carriage Bolts (#8), 4- Flat Washers (#13) and 4- Nylon Nuts (#15) as shown.
Page 8
Assembly Instructions Assembly Stage 2 Attach Seat / Back pads to the Frame Assembly Assembly Hardware Required: #11 Button Head Allen Screw Qty. 2 #14 Flat Washer Qty. 4 #12 Button Head Allen Screw Qty. 2 Assembly Description: A) Make sure the preinstalled Bushing (#21) are secured in the Seat Adjustment (#1) and Back Adjustment (#2).
Preventative Maintenance Equipment Maintenance Use a dampened soft cloth to wipe the equipment free of perspiration after each use. Do not use abrasive cleaners or petroleum-based solvents to clean the equipment. Regularly inspect product for loose assembly hardware and worn components. Basic repairs can be performed by the customer.