Cleaning With The Brush; Lubrication - Panasonic ER-GB80 Operating Instructions Manual

4. Wipe off the water with a towel and
let it dry naturally.
• It will dry faster with the blade
removed.
5. Apply the oil to the blade after drying.
6. Attach the comb attachment and
blade to the trimmer.
Themarkontheleftmeanssuitableforcleaning
underanopenwatertap.
Cleaningwiththebrush
1. Remove the trimmer from the AC
adaptor.
• Make sure that the trimmer is turned
off.
2. Remove the comb attachment.
3. Hold the main body, place your thumb
against the blades and then push them
away from the main body.
4. Brush off any hair trimmings from the main body and from
around the blade.
5. Brush any hair trimmings out from
between the stationary blade and the
moving blade while pressing down the
cleaning lever to raise the moving
blade.
14
6. Apply the oil to the blade.
7. Attach the comb attachment and blade to the trimmer.

Lubrication

Apply the oil to the trimmer before and after each use.
Apply a drop of the oil to the points indicated by the arrows.
Remountingtheblade
Fit the mounting hook into the blade
mounting on the trimmer and then push
in until you hear a click.