Audiovox Rampage ACC-52 Owner's Manual And Installation Manual page 7

PROCEDURE FOR VERTICAL INSTALLATION
NOTE: If the anti-vibration spring position has been changed and verified for vertical mounting
(as shown on page 3), start with step 2.
1
Set the left and right anti-vibration springs to position
"V".
position "V"
3
Determine the mounting location, and drill four mount-
ing holes.
Never mount the unit near the fuel tank.
Drill holes 4 mm in diameter.
2
Attach bracket (L) and bracket (R) to each side of the
unit, using the hexagonal bolts with washer base
(M5 x 10).
NOTE: Use seals (A) to cover unused
mounting holes on sides of unit.
Bracket (L)
4
Mount the unit in place, using four self-tapping screws
(M5 x 12).
Use RTV (silicone sealer) on screw threads or around
the holes to prevent moisture intrusion.
Bracket (L)
Bracket (R)
Bracket (R)
Hexagonal bolt
with washer base (M5 x 10)
Self-tapping screw
(M5 x 12)
7