About Bluetooth; Media Playback Controls; Select The Audio Source; Bluetooth - Panasonic SC-RS50 Owner's Manual

About Bluetooth

Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
∫ Frequency band used
≥ This system uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
≥ The actions below are punishable by law in some
countries:
– Taking apart or modifying the system.
– Removing specification indications.
∫ Restrictions of use
≥ Wireless transmission and/or usage with all

Bluetooth

equipped devices is not guaranteed.
®
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings of a
device, it can fail to connect or some operations can
be different.
≥ This system supports Bluetooth
But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
≥ This system cannot transmit data to a Bluetooth
device.
∫ Range of use
≥ Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the
environment, obstacles or interference.
∫ Interference from other devices
≥ This system may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this system is located too
close to other Bluetooth
use the 2.4 GHz band.
≥ This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.

∫ Intended usage

≥ This system is for normal, general use only.
≥ Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).
8
RQT0A75
®
security features.
®
devices or the devices that
®

Media playback controls

The following marks indicate the availability of the
feature.
CD audio in CD-DA format or a CD that
[CD]:
contains MP3 files (l 16)
Internal memory
[MEMORY]:
(About recording to the internal memory,
refer to page 12.)
USB devices containing MP3 files (l 16)
[USB]:
[BLUETOOTH]: Connected Bluetooth

Basic play

( ,
[CD] [MEMORY]
Preparation
≥ Turn the unit on.
≥ Insert the media or connect the Bluetooth
(l 6, 7)
1

Select the audio source.

For disc:
Press [CD/ ] repeatedly to select "CD".
For internal memory:
Press [MEMORY] to select "MEMORY".
For USB device:
Press [RADIO, USB] repeatedly to select "USB".
For Bluetooth
Press [CD/ ] repeatedly to select
"BLUETOOTH".
®
(When selecting using this unit, press
[SELECTOR, s
2
Press [1/;] to start playback.
≥ [MEMORY]: When you start play with [1/;], playback
starts from the first track to the last track in the internal
memory.
Basic controls
Stop
Pause
Skip
Search

device (l 7)

®
, ,
[USB] [BLUETOOTH]
device:
®
PAIRING] repeatedly.)
Press [∫].
≥ [MEMORY], [USB]: The position is
memorized and "RESUME" is displayed.
≥ [MEMORY], [USB]: Press [∫] twice to stop
the playback fully.
– [MEMORY]: Favorite play and one-touch
mix play will be canceled. (l 9)
Press [1 .
/;]
Press again to continue playback.
Press [:] or [9] to skip track.
(This unit: [:/6] or [5/9])
[CD] (MP3), [MEMORY], [USB]
Press [3] or [4] to skip the album.
≥ [MEMORY]: When using the favorite play
function, you can only skip track or album
within the selected number for
(FAVOURITE) [1] to [5].
During play or pause, press and hold
[6] or [5].
(This unit: [:/6] or [5/9])
)
device.
®