1
2
7
7-34
The Alarm Indicator is On/Blinking
Downloaded from ManualsPrinter.com Manuals
Turn the power OFF, wait for 10 seconds or longer, and then
turn it ON again.
OFF
If the message does not reappear, the printer can be used as normal. If the error
message still appears, proceed to the next step.
Note down the error code displayed in the Printer Status
Window.
When the error code "E012 0000" appears, see "When the Duplex Unit is not
Installed Properly" (p. 7-26) and install the duplex unit.
ON