Connecting To Power Supply; Preparing The Connection; Wiring Plan - Siemens SITRANS LVL100 Operating Instructions Manual

Note safety instructions
Selecting connection
cable
Cable gland
Plug
SITRANS LVL100 l CONTACTLESS ELECTRONIC SWITCH

5 Connecting to power supply

5.1 Preparing the connection

Always keep in mind the following safety instructions:
Connect only in the complete absence of line voltage
l
SITRANS LVL100 is connected with standard cable with round
cross section. Select the outer diameter of the cable
respectively so that the seal effect of the cable gland is
ensured.
Valve plug DIN 43650, ø 4.5 ... 7 mm
l
Use cable with a round wire cross section and tighten the
cable gland.
When mounting outdoors, on cooled vessels or in humid
areas, in which cleaning is carried out e.g. with steam or high
pressure, it is particularly important to seal the cable gland.

5.2 Wiring plan

Valve plug DIN 43650
For this plug version, standard cable with round wire cross-
section can be used. Cable diameter 4.5 ... 7 mm, protection
IP 65.
Connecting to power supply
15