Disassembly; Cover Battery Assy; Battery - Sony Xperia miro ST23i Working Instructions

3

Disassembly

The disassembly is done in the following order:

1. Cover Battery Assy

2. Battery

3. Rear Cover Assy
4. Core Unit Label
5. Tape Connector (a) & Sub Board Assy (b)
6. Tape Connector (a) & Cover Front Assy (b)
7. Tape ZIF Connector (a) & FPC Link (b)
8. RF Cable (a) & Main PBA (b)
3.1 Cover Battery Assy
Insert a finger into the gap as shown in picture and gently
pull upwards to release the hooks of the Cover Battery Assy.
3.2 Battery
Insert a finger and raise the bottom of the Battery to release
it.
Remove the Battery.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
6(60)