Global Settings; Global / System - Studiologic SL88 STUDIO Operation Manual

In the HOME page, press OUT button to enter in the GLOBAL/
SYSTEM page. (NOTE: to go back to the main display press
HOME).

GLOBAL / SYSTEM:

PANIC
MAIN TRASPOSE
RESTORE
STICK CALIBRATION
VERSION:
The following controls are available:
PANIC
In case of pending notes or controls (coming from the exter-
nal devices, connected to the instrument) pressing this com-
mand the "ALL NOTES OFF" message is sent to all devices, to
restore the normal function;
MAIN TRANSPOSE
Selecting this function and rotating the ENCODER, all enabled
ZONES can be transposed in a range or -12 and +12 semi-
tones, with a single control.
RESTORE
This function restores all initial settings of the instrument;
please note that all your programming will be restored and
consequently this function should be activated only in case
of real need, saving all your programs before restoring the
unit.
STICKS CALIBRATION
In the first page the 3 sticks icons are blue and you can verify
the actual range by moving them all the way along the four
sides, reaching to the edges of the related area.
To calibrate a stick, press it (click): the area will become yel-
low; now move the stick along the four sides, reaching accu-
rately the four edges of the control area, repeating the move-
ment at least 2-3 times
Once the point 2 is made, click again on the stick: the area will
become green, to confirm that the calibration is done.
VERSION
It shows the installed FIRMWARE version of the instrument.
---
+00
---
---
V---

Global settings

GLOBAL / SYSTEM
GLOBAL / SYSTEM:
GLOBAL TRANSPOSE:
+00
C
GLOBAL / SYSTEM:
STICKS CALIBRATION:
STICK 1 STICK 2 STICK 3
GLOBAL / SYSTEM:
STICKS CALIBRATION:
STICK 1 STICK 2 STICK 3
SL88 Studio by Studiologic®
E
15