Conducting Calls - With Multiple Users; Call Waiting - Siemens HiPath 3000 Operating Instruction

Conducting calls – with multiple users
Step by Step
74
Conducting calls – with multiple
users

Call waiting

You need to speak to a user in your communications
system urgently, even though his line is busy. You can
send a call waiting signal during his call to let him know
you want to talk to him. The user either answers
immediately or you will be automatically connected to
him when he has finished his call.
This function is only available if it has been configured
by the service engineer.
The user is busy. You want to use call waiting.
p
Wait until the message "Camp-on" appears on the
display (ringing tone).
You receive a call waiting signal (second call)
You are still available to other callers, even though you
are on the telephone. The call waiting signal informs you
of the second call while you are conducting a call. You
can answer this call without ending the first call.
p
You are on a call and hear a call waiting signal.
If you want to answer the second call, you can either
place the first call on hold (the first caller waits) or end
the first call.
Placing the first call on hold and answering the
second call
Answer the second call.
2ndCall
Talk to the second caller. The first caller waits. His call is
on hold. You can now:
toggle between the two callers  page 79 or
•
set up a conference  page 80.
•