Hazard Warning Flasher Switch - Subaru Crosstrek Quick Reference Manual

B
Wiper and washer switch
2
3
C
Hazard warning flasher switch
Models without
multifunction display
Models with
multifunction display
D Illumination brightness control dial
1
Windshield wiper
1
To operate the wiper, rotate knob to;
Wiper intermittent time control
2
Windshield washer
3
4
Rear window wiper and washer
4
To operate the wiper, rotate knob to;
Rotate knob to
wiper operates.
To turn on the hazard warning flasher, push the button.
Use the hazard warning flasher when you have to park
under emergency conditions.
Turn the dial to adjust the illumination brightness of the
instrument panel.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
When the control dial is turned fully upward, the
illumination brightness becomes the maximum and the
automatic dimming function does not work at all.
: Mist (for a single wipe)
: Off
: Intermittent
: Low speed
: High speed
: Continuous
: Intermittent
: Off
: Washer
. The washer fluid sprays and the
7