Sylvania SDVD7049 Manual page 18

In Video Setup Page:
1. If Picture is selected, using the Direction and ENTER/OK Buttons to set the picture quality such like
Brightness; Contrast; Hue or Saturation as desired.
2. If Panel Display is selected, using the Direction and ENTER/OK Buttons to set the aspect ratio of the panel
to 16:9 or 4:3 to match the aspect ratio of the playing movie.
In Preference Setup Page:
1. If TV Type is selected, using the Di
(Note: The TV system in US, Canada and Mexico is NTSC).
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER/OK buttons to select and set
the priority of the available language.
3. If Parental is selected, using the Direction and ENTER/OK Buttons to set the rating level as desired as follow:
►
~ Press the Button to enter, the rating level list will appear.
▲
~ Press the or
~
Press the ENTER/OK Buttons to enter, password enter window will pop up.
~ Enter the six digit password ( default password is 111111 ) by pressing the Numeric Buttons.
~ Press the ENTER/OK Buttons to save the settings and exit.
~ Rate levels:
1. Kid Saf: Kid safe
2. G:All ages
3. Pg:Parental Guidance
4. Pg13:Parental Guidance less than 13 years old
5. Pgr:Under 17 years old, Parental Guidance suggested
6. R:Under 17 years old, Parental Guidance strongly
7. Nc17:17 years old or above
8. Adult: Adult only
4.
If Password is selected, press the ENTER/OK Buttons to enter, the subsetting menu will appear.
~ If Password Mode is selected, using the Direction and ENTER/OK buttons to set it On ( activate the
rating level setting ) or Off ( Password is needed ).
~ If Password is selected, press the ENTER/OK Buttons twice to enter. The New password setting
menu will appear.
~ Enter the six digit password. The Column of new Password will be highlighted.
~ Enter the new six digit password. The Column of Confirm Pwd will be highlighted.
~ Enter the new password again. OK Button on the screen will be highlighted. Press the ENTER/OK
Buttons to save the setting and exit.
5. If Default is selected, using the Direction and ENTER/OK Buttons to reset all setting to default setting or
press the SETUP Button to exit without changes.
SYSTEM SETUP
rection and
(Functions depend on the recording of DVD).
▼
Button to select the desired level.
ENTER/OK Buttons to set to
17
Sharpness;
PAL, AUTO or NTSC.