Sylvania SDVD7049 Manual page 10

LCD ON/OFF
Press to turn on or off the LCD display.
POWER
Press to turn to standby mode. Press again to turn
on .(For saving battery power, always turn off the unit
by slide the Power ON/OFF switch to OFF position.)
VOL ( VOLUME +/–
Press to increase or decrease volume.
MUTE
Press to turn off the sound, press again to resume.
GOTO
~ To select the desired Title and Chapter, press the
GOTO Button once, the Title and Chapter selection
menu will appear on the screen. Use the Direction
and Numeric Buttons to select the desired title and
chapter then press the ENTER Button to start
playback.
~ Select the desired establish time by Title to play,
press the GOTO Button twice, the time selection
table appear on the screen. Using the Direction and
Numeric Buttons to enter the desired establish time.
The unit will start plays the movie from the selected
establish time.
~ Select the desired establish time by Chapter to play,
press the GOTO Button three times, the time
selection table appear on the screen. Using the
Direction and Numeric Buttons to enter the desired
establish time. The unit will start plays the movie
from the selected establish time.
STEP
During movie playback, press STEP Button repeatedly
to play the movie frame by frame.
Press the Play/Pause Button to resume normal
playback.
ZOOM
During movies playback, press the ZOOM Button
repeatedly to zoom in/out the picture. In zoom in mode,
press the Direction Buttons to select the parts of the
zoomed picture to watch.This function is not available
on all discs.
CONTROLS
TITLE
Press to return to disc's title page (Function depends
on the recording
MENU
Press to return to disc's menu page (Function depends
on the recording of the disc).
AUDIO
During disc playback, press repeatedly to select the
desired language or sound track. (Function depends on
the recording of disc).
ANGLE
During DVD playback, press repeatedly to select the
viewing angle
disc ).
SUBTITLE
During DVD playback, press repeatedly to select the
desired subtitle ( Function depends on the recording
of disc ).
N/P
Press to turn switch to NTSC or PAL system..
OSD
(On Screen Display)
During playback, press the OSD button repeatedly to
read the information of playback status.
A-B Repeat
During Playback, press the A-B Button to define where
you want the section to start. Press A-B Button again
to define where you would like the section to end, the
unit will then play the selected section repeatedly and
continuously. Press the A-B Button again to resume
normal playback.
discs).
SLOW
During playback, press the SLOW Button repeatedly
to set the slow motion speed. Press
Button to resume normal playback.
9
of the disc).
( Function depends on the recording of
(This function is not available on all
Play/Pause