Razor A5 Owner's Manual page 10

REPAIR AND MAINTENANCE
q Replacing the Tires/Tubes
Tools Required: 5 mm Allen Wrench
1
Completely deflate the tire. Use
a 5mm Allen wrench to remove the
four bolts on the hub. Remove the
worn/damaged tire or inner tube
and replace it with a new one.
Note: Be careful not to lose the
four nuts on the opposite side of
the hub.
q Replacing the Wheels
Tools Required: 5 mm Allen Wrench
1
Front wheel sequence.
3
Rear wheel sequence.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
2
Assemble the hub using the
diagram at right. Tighten bolts
using 5mm Allen wrench.
Re-inflate. (Do not exceed 60 PSI)
2
Securely tighten the bolt
as shown.
4
Securely tighten the bolt
as shown.
Nuts
Spacer
Bearings
8
Wheel Hub
Fastener Bolts
Tire
Bearings