Removing Emi Shields And Filler Panels - NEC LS2400 User Manual

Removing EMI Shields and Filler
Panels
1. Power off the system and remove the front panel as
described earlier in this chapter.
2. Locate the EMI (Electromagnetic Interference) shield and
filler panel covering the bay into which you are installing
a peripheral device. The filler panel is released by
pressing on its sides and removing it from the slots in
the EMI shield. Save the panel for reinstallation.
3. The EMI shield is attached to the front of the chassis be
two screws. Remove the screws and EMI shield covering
the bay into which you are installing a peripheral device.
Save the shield and screws for reinstallation.
Upgrading Your System 4-35