Removing Emi Shields And Filler Panels - NEC ES1200 User Manual

5-28

Removing EMI Shields and Filler Panels

Upgrades and Options
1. Power off the system and remove the front panel as
described earlier in this chapter.
2. Locate the EMI (Electromagnetic Interference) shield
and filler panel covering the bay into which you are
installing a peripheral device. The filler panel is
released by pressing on its sides and removing it
from the slots in the EMI shield. Save the panel for
reinstallation. See Figure 5-14.
3. The EMI shield is attached to the front of the chassis
be two screws. Remove the screws and EMI shield
covering the bay into which you are installing a
peripheral device. Save the shield and screws for
reinstallation.
Figure 5-14. EMI Shield and Filler Panels Removal