2.
What can I do if I cannot open the web-based
management page?
1)
Verify all the hardware connections. The computer should be
connected to the Ethernet port (yellow).
2)
Turn off the router and turn it back on.
3)
Change another cable/web browser/computer.
4)
Check the IP settings of your computer, and ensure that it is
set to "Obtain an IP address automatically".
3.
How do I restore my Router's configuration to its factory
default settings?
If your router does not work properly, you can reset it and
then configure it again. With the Router powered on, press
and hold the WPS/RESET button on the rear panel for
approximately 8 seconds before releasing it.
4.
What can I do if I forget my password?
1)
For default wireless password:
Please refer to the "Wireless Password/PIN" labeled on the
bottom of the Router.
2)
For the web management page password:
Reset the router first and then use the default user name and
password: admin, admin.
WIFI
WPS/
ON/OFF
RESET
WIFI
WPS/
ON/OFF
RESET
10