Remote Control; Cautions On Handling Discs - Denon DCD-F101 Operating Instruction

6

REMOTE CONTROL

Names and Functions of System Remote Control Unit Buttons (The RC-927 is included with
the DRA-F101.)
The CD related buttons on the system remote control unit included with the receiver are explained below.
2
Buttons not explained here function in the same way as the corresponding buttons on the main unit.
2
(Refer to pages 3 and 6.)
Power standby button
(SYSTEM POWER STANDBY)
Press this button to switch the
system power standby mode.
(You can not switch this unit
independently.)
Number buttons (1 to 10)
Use these for direct search and
programming.
+10 button
Press this to select track
numbers of over 11.
TIME button (TIME)
Play/pause button ( / )
1 3
Stop button ( )
2
Automatic search forward
buttons ( )
9
Automatic search reverse
buttons ( 8 )
TAPE
Function selector switch
Switches the operation of the
buttons.
When you want to operate the
CD, switch to the CD position.
Power on button
(SYSTEM POWER ON)
Press this button to switch the
system power on mode.
You can not switch this unit
independently.
PROG/DIRECT button
(PROG/DIRECT)
Press this for programmed
playback. (Refer to page 10, 11.)
OFF ON
SYSTEM
CALL button (CALL)
POWER
Press this to check the pro-
PROG /
grammed tracks.
DIRECT
1 2 3
CALL
4 5 6
CLEAR button (CLEAR)
CLEAR
7 8 9
Press this to clear programmed
RANDOM REPEAT
10 +10
tracks. The last track in the
CD SRS
TAPE MD TIME EDIT
program is cleared each time the
button is pressed.
TIME/
DIMMER
PANEL
RDS BAND TUNING
REPEAT button (REPEAT)
Press this for repeat playback.
STOP PLAY VOLUME
/SELECT
(Refer to page 11, 12.)
PRESET
+
RANDOM button (RANDOM)
-
Time edit button (TIME EDIT)
TAPE
SLEEP FUNCTION MODE
Press this to perform edited
recording according to the length
CD
TUNER
MD of the cassette tape. (See page
14.)
Manual search forward buttons
( )
7
Manual search reverse buttons
( )
RC-927 6
REMOTE CONTROL UNIT
7

CAUTIONS ON HANDLING DISCS

• The types of discs listed on the table below can be used on the DCD-F101.
The marks are indicated on the disc labels or jackets.
Usable Recorded
Mark (logo)
discs signals
CD
CD-R Digital
CD-RW audio
(NOTE 1)
Recordable
ReWritable
Discs
Only the discs including the marks shown on page 7 can
be played on the DCD-F101.
Note, however, that discs with special shapes (heart-
shaped discs, hexagonal discs, etc.) cannot be played on
the DCD-F101. Do not attempt to play such discs, as they
may damage the player.
Holding Discs
Avoid touching the surface of discs when loading and
unloading them.
Be careful not to get
fingerprints on the signal
surface (the side which shines
in rainbow colors).
NOTE 1: According to recording quality, some
Disc
CD-R/RW cannot be played.
size
12 cm
8 cm
Cleaning Discs
2 Fingerprints or dirt on the disc may lower sound and
picture quality or cause breaks in playback. Wipe off
fingerprints or dirt.
2 Use a commercially available disc cleaning set or a soft
cloth to wipe off fingerprints or dirt.
Wipe gently from the middle Do not wipe with a circular
outwards. motion.
NOTE:
• Do not use record spray or antistatic. Also do not
use volatile chemicals such as benzene or thinner.
Record Thinner Benzene
spray
ENGLISH
7