Sample Test Page - Paxar Monarch 7410 Operating Instructions Manual

Test/Reset Button
LED Status Indicators
Antenna
Press this button down for less than 5 seconds to
print a test page on the printer. The test page
shows the current wireless and network settings of
the print server. See "Sample Test Page" for more
information. If the test page does not print, see
Chapter 4, "Troubleshooting."
Press this button down for more than 5 seconds
while turned on to reset the print server to its
factory default parameters.
The green light comes on when the unit is turned
on, then the green light turns off. The yellow light
comes on solid when an Ethernet link (wired) is
established. The red light comes on solid when a
wireless link is established. The green light blinks
during network activity.
A rugged 802.11b compatible antenna, mounted on
the back of plastic-cover printers or on the top of
metal-cover printers.
Installing the Print Server Hardware 1-5