Oven Operation - Rinnai RO-E6208TA-EM Operation And Installation Manual

Timer
23 hours 59 minutes can be set as maximum.
To set the time, press the
the setting, the correct time (hour, minute) and the
pressed the time displaced will be seen. When the set time is reached,
again. To stop the alarm, press the
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the
set process as well as the real time (hour, minute) will disappear. After the power is on again, three "0"
and "AUTO" shows on the screen, and the oven will automatically reset.
3-key timer procedure baking mode (only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show "12:00" with the square symbol above "
Press the "+" or "-" button will increase or decrease the number until it reaches the right time; after 5 seconds it
will start automatically or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
Press the function button repeatedly until the square symbol above the "
-
button to set the time frame baking for;
Press the function button repeatedly until the square symbol above the "
-
button to set the time to switch off;
Adjusting the constant temperature button and choosing button to set temperature and baking method.
-
After these setting, the symbols above the "
-
oven has been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
Press the function button repeatedly until the square symbol above "
45 minutes;
Press the function button repeatedly until the square symbol above "
at 14:00.
After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the
setting of baking procedure has been remembered automatically.
When the clock shows at 13:15 (between 14 -15min), the oven will switch on automatically.
During the baking time frame, the square symbol will keep flashing.
When the clock shows14:00, baking will switch off automatically. The alarm will ring, the square symbol will flash,
To stop the ringing press any button.
Semi-automatic setting (set the time of automatic starting and ending)
A. Setting the time frame of baking (10 hours longest)
Press the function button repeatedly until the square symbol above "
Switch on the oven immediately, the square symbol above "
square symbol above "

OVEN OPERATION

button, and then + or - button, until the required time is shown on the screen. After
button.
" and "
" will flash, and alarm ring, To stop the ringing press any button.
button will show on the screen. When the
disappears and the alarm will ring
" flashes, and press "+" or "-"
" will flash, it indicates the baking procedure of
" flashes, and set the time of baking to
" flashed, and set the end time of baking
", and set the time frame of baking;
" begins to flash. When the baking is done the
5
button is
";
" flashes, and press "+" or "-"