Oven Operation - Rinnai RBO-106SIX Operation & Installation Manual

Notes on oven operation

Turn on the appliance by pressing ON/OFF key

Select a function and oven begins to heat up.

When the selected temperature is reached, an
audible acoustic signal sounds.

Oven lighting switches on automatically when the
oven is turned on. The oven lighting switches off
after 10 minutes when the appliance stops
operation.

Turn off the appliance by pressing ON/OFF key
Selecting or changing the oven function

Turn on the appliance by pressing ON/OFF key

Press FUNCTION
repeatedly until the desired oven function appears.
o
A suggested temperature appears on the display.
o
If the suggested temperature is not changed
within 5 seconds, the oven begins to heat up
automatically.
Changing the oven temperature

Use SELECTOR keys
temperature from 0
0
setting changes in 5 C steps.
Thermometer symbol

The thermometer symbol
heats up.

The three segments of the thermometer symbol
shows that Fast Warm Up is working.
Speedcook mode
This function allows you to heat up the oven in a short
time. (Note: This function is not appropriate for cooking
or food preparation. Therefore, do not put food to be
cooked into the oven until Speedcook mode is
completed).

Set oven function. Change the temperature if
necessary.

Press SPEEDCOOK key
lights up.

OVEN OPERATION

SELECTOR keys or
or to set the oven
0 0
C to 270 C. The temperature
slowly rises as the oven
. The thermometer symbol
o
The flashing bars indicate that Speedcook mode
is operating. When the oven heats up to the set
temperature, the bars of the heat indicator light
up. An audible signal sounds and the
thermometer symbol goes off.
o
The oven is ready for cooking with the selected
cooking mode. You can now place the food in
the oven.
Memory mode
The memory mode enables you to save one customized
cooking mode.

Set oven function and temperature. If necessary, set
COOK TIME and/or END TIME

To save a setting, press and hold MEMORY key
for approximately 2 seconds until an acoustic signal
sounds.

To save a new setting, repeat above procedure and
the previously saved setting is replaced by the new
one.

Starting the memory mode
o
Turn on the appliance by pressing the ON/OFF
key
o
Press MEMORY key
setting.
5
to call up the saved