Operating Instructions - Audiovox Phase Linear PCD163 Owner's Manual

OPERATING INSTRUCTIONS

Power On/Off Button
1
Press the power button (1) to turn the unit on
and off when the vehicle ignition switch is on. If
the radio is off when the ignition switch is turned
off, the power button must be pressed to turn
on the radio after the ignition switch is turned
on. If the ignition switch is turned off while the
radio is on, the radio will come on automatically
when the ignition switch is again turned on.
Liquid Crystal Display Panel
2
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and all activated functions.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
characters on the LCD may slightly
decrease. The LCD read-out will return to
normal when the temperature inside the
vehicle increases to a normal range.
Volume Control
3
To increase the volume level, press the volume
+ button (3a). The volume will increase and the
level will be shown on the display panel from a
minimum of "VOL 00" to a maximum of "VOL
46". To decrease the volume, press the volume
– button (3b). The display will automatically
return to the normal indication 5 seconds after
the last volume adjustment or when another
function is activated. These buttons are also
used in conjunction with the SEL/MENU button
(4) to adjust the bass, treble, balance and fader
levels.
Select (SEL/MENU) Button
4
This SEL/MENU button (4) is used to select the
audio function (volume, bass, treble, balance or
fade) to be adjusted using the volume buttons
3a
1 5
BAND
LOUD
4
SEL/MENU
MODE
3b
7
6
(3). Press the SEL/MENU button once to set
the unit for volume adjustment ("VOL" and the
setting number will appear on the display
panel). Press the button additional times to
select bass ("BAS" on display panel), treble
(TRE), balance (BAL), fader (FAD), and volume
(VOL) again. The display returns to the normal
indication 5 seconds after the last adjustment
was made or when another function is
activated.
2
MUTE
TRACK
RPT SCN
9
PCD163
DISP
PCD163
6
AUX IN
8