Basic Operation - Audiovox Movies2Go MMD154 Owner's Manual

Basic operation

Turning on the player
Press the [ ] button on the remote control or on the front panel. The player turns on, and the
input source and format are displayed on the screen:
Notes: 1. The default is DVD-IN.
2. If the message "NO DISC" is displayed on the screen, insert Disc Media or
press SRC button to change input source.
Selecting the input source
1. After Power ON, press SRC button to switch from one mode to another.
2. The operating modes changes in the following order:
DVD-IN > AV 1> AV2> DVD-IN
Note: DVD Disc cannot be inserted if unit is not in DVD mode.
Turning off the player
Press the[ ] button again; the player will be turned off.
1. If there is a disc in the player, it will continue playback from last position the
next time you turn the player on.
2. DVD Disc cannot be ejected if player is switched off or not in DVD mode.
10
DVD-IN
Input source name
The system of the input source
NTSC
detected automatically
MMD154