Before You Start - Pulse REVSTER Owner's Manual

Before You Start

WARNING:
"OFF" before assembling the scooter.
Estimated Assembly Time
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 12 hours for the initial charge (see page 6 for charging information).
battery charger
(included)
Required Tools
10 mm / 8 mm 4 mm hex wrench
wrench (not included)
(included)
5 mm hex wrench
two [2] 13 mm (included)
wrenches
(not included) second
5 mm hex wrench
(not included)
WARNING:
may or may not be compatible with the design and will void the warranty.
4
Remove all packing and items from the display box. Make sure that the power switch is turned
brake
charging
port
phillips
screw driver
(not included)
DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
throttle
reset
button
on/off
switch
Altering of the original components
reset
button