Pulse REVSTER Owner's Manual page 10

Repair and Maintenance
Front Wheel Replacement
Tools required: Two 5mm hex wrenches
1. Using two 5 mm hex wrenches loosen
and remove the front axle by turning the
wrenches counter clockwise.
Battery Care and Disposal
Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).
Disposal: This product contains sealed lead acid batteries which must be disposed or recycled in an environmentally safe manner. Do not
exhausted batteries to a state or federal approved lead acid battery recycler or check with your local retailer of vehicle batteries.
WARNING:
WARNING:
(nickel-cadmium) batteries.
Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).
10
2. Reinstall new replacement wheel
ensuring to note the order and location of all
components.
THIS SCOOTER CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN AC-
CORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE
FOLLOWING DISPOSAL INSTRUCTIONS:
Make sure to wash your hands after handling batteries as they contain lead compounds.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
3. Reinstall hardware and tighten clockwise
with a 5 mm hex wrench.