Locosys GW-60 Quick Start Manual page 8

TO USB MSC: Connection by Mass Storage Class (MSC)
3.14
mode mainly for non-Windows platform user.
Tip: How to get GPS data in USB MSC mode
(1) Set"USB CLASS"option to"UMS"first.
(Note: Before setting, the USB charging cable MUST be
disconnected.)
(2) Connect to USB, and press
MSC"to enter USB MSC state.
(3) Find a new flash drive with a READ only file—
GPSLOG.SBP on your host PC.
(4) Remove USB cable to exit.
FIRMWARE VERSION: check device status
3.15
Firmware Version: VX.XXXXXX
User Name: XXXXXX
Serial Number: SXXXXXXXX
GPS Version: XXXX
8
↵
ADJUST/ "TO USB
www.locosystech.com