Ss Specify Delimiter - Brother PT-P900W Software Manual

^SS Specify delimiter
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
0≤n1≤2
0≤n2≤9
00h≤datah≤FFh
Description
 The delimiter is used to indicate when to move to the next object in data that is being sent.
 Specifies the text string for the delimiter.
(n1*10)+n2: Length of the text string (between 1 and 20)
data: Text string (The maximum number of characters that can be set is 20 characters (bytes).)
 The default text string for the delimiter is "09h" (Tab code).
 A text string that will not appear in the print data should be specified.
 This command is a dynamic command.
Remarks
 Invalid if more than 20 characters have been specified
Example
 To change the delimiter to "," (0x2C):
Since the text string contains one character, n1=1 and n2=1 and, with the text string (datah) "," (2Ch), the
command will be as follows.
^ S S 0 1 ,
(5Eh 53h 53h 30h 31h 2Ch)
S S n1 n2 data
83 83 nd1 nd2 datad
53 53 nh1 nh2 datah
- 38 -
P-touch Template Command Reference
7. Control Command Details