Table of Contents
Advertisement
Chapter 4
Video off Method
V/H SYNC+Blank
(Default Vaule)
Blank Screen
D P M S
Video Off In Suspend
This determ ines the m anner in which the m onitor is blanked.
[N O,Y es(Default Value)]
Suspend Type
Select the Suspend Type.
[P wrOn Suspend, Stop Grant (Default Value)]
MODEM Use IRQ
This determ ines the IR Q in which the MOD E M can use.
[ 3 (
Default Value),4,5 ,7,9,10,11,N A]
APM Suspend Timer
This field specifies the tim e the system enters power-saving m ode.
It is available only when the P ower Managem ent field is set to
U ser Define.
[1Min, 2Min, 4M in, 8Min, 12Min, 20Min, 30Min , 40Min, 1H our,
D isabled(Default Value)]
APM HDD Pow er Dow n Timer
This field specifies the tim e the system enters H D D power down.
It is available only when the P ower Managem ent field is set to
U ser Define.
[1Min, 2Mi n, 3Min, 4Min, 5Min, 6Min, 7Min, 8Min, 9 Min,10Min,
11Min, 12Min, 13Min, 14Min, 15Min, D isabled(Default Value)]
PWR-Off Mode by P WR-BTTN
This field specifies the function of power button.
[Instant-Off(Default Value):When power button pressed, the system
turns off im m ediately .]
[D elav 4 Sec: After the power button has been pressed andheld for four
seconds, the system turns off.]
Turn off the vertical and horizontal
synchronization ports and write blanks
to the video buffer.
Writes blanks to the video buffer only.
Initial display power management
signaling with DPMS.
37
BIOS Setup
Advertisement
Table of Contents
