Table of Contents
Advertisement
TURNING THE UNIT ON OR OFF
1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a
comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will
illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
*Note: Unit will turn On automatically when
a Disc is inserted
Power
Remote Sensor
ON/OFF
Infrared Transmitter
Button
ON
OFF
AUTO
Rear IR Sensor
3
Screen Release
Advertisement
Table of Contents
