Citrus Pressassembly And Use - KitchenAid KFP710 Instructions And Recipes Manual

Preparing the Food Processor for Use
Citrus Press Assembly and Use
1. Position and lock the work bowl on
the base.
2. Place the strainer basket in the bowl
and position the locking clip to the
left of the work bowl handle.
3. Turn the basket counterclockwise
until the clip locks into the handle.
8. Close the lid of the strainer basket.
Hold the lever arm down firmly with
an open palm to maintain even
pressure. Operate the citrus press
only when the lever arm is in the
down position, holding the fruit on
the cone.
4. The 2-piece cone offers two sizes. Use
the outer cone for grapefruit, oranges
and other large fruits. Remove the outer
cone to reveal a smaller, inner cone
that's perfect for lemons and limes.
5. Open the lid and place the cone inside
the strainer basket, over the power
shaft. It may be necessary to rotate the
cone until it falls into place.
6. Halve the fruit to be juiced.
7. Place fruit half on the cone.
NOTE: To avoid splatters, use the citrus
press with the clip-on lever arm.
9. Operate the citrus press by pressing
the ON button or the Pulse button.
10. When juice is fully extracted, press
the OFF button.
NOTE: Do not exceed the maximum
liquid level line on the work bowl, or juice
will leak from the bowl.
11. Unplug Food Processor
12. Unlock the strainer basket by turning
it clockwise. Remove juiced fruit,
cone, and strainer basket from the
work bowl.
13. Remove the work bowl from Food
Processor and pour juice into desired
containen
14. To detach the clip-on lever arm from
the strainer basket for cleaning, pull
the clip at the bottom of the basket
away from the basket side and remove
the lever arm from the basket.
15. When reattaching the lever arm to the
strainer basket, make sure the tabs
on the clip snap securely into a pair
of holes in the bottom of the basket.
10