Night Owl F6-DVR4 Installation Instructions Manual page 2

Installing or Upgrading
the DVR's HDD
Most DVR's included in our kits already have a pre-installed internal HDD and is
ready to begin recording right out of the box. For instances in which you require a
larger capacity HDD or if your DVR did not include a pre-installed HDD, you can
follow along with these quick and easy steps that will demonstrate how to install /
upgrade the DVR's HDD. The steps below are general and the images of the DVR
may not be identical to the DVR model you purchased, however the process should
be the same.
CAUTION: Never install or remove the HDD
while the DVR is powered on!
Remove the
screws from that hold
the DVR Casing:
You will need a Philips head
screwdriver for this step.
To begin you must first remove
the screws on the back and
sides of the DVR.
Installing or Upgrading the DVR's HDD – F Series 2