Setting The Clock - iHome iBT18 Instruction Manual

Setting the Clock

1. Press and hold the Sleep/Clock Adjust Button for 2 seconds until the clock display flashes and a beep
sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the time
display.
3. Press the Sleep/Clock Adjust Button to confirm the time. The year will flash.
4. Press the – or + Buttons to adjust the display to the current year.
5. Press the Sleep/Clock Adjust Button to confirm the year. The date will flash.
6. Press the – or + Buttons to adjust the clock to the current date (hold for rapid setting).
7. Press the Sleep/Clock Adjust Button to confirm the date. "DST ON" will flash on the display,
indicating automatic daylight saving time feature is active and the unit will add or subtract an hour
automatically at the start or end of daylight saving time. To disable DST feature, press the – or +
Buttons to toggle to "DST OFF".
8. Press the Sleep/Clock Adjust Button to confirm the clock setting and exit clock setting mode. 2 beeps
will confirm clock setting is complete.
TIP: To toggle the clock display between standard12 hour time and 24 hour ("military") time display,
press the Alarm or Alarm Button when display is flashing during time setting.
5
iBT18
Using the