Page 2
App Store. For information on the iHome+Sleep app and how it works with your iA5, please vist the App Store and download the app or visit www.ihomeaudio.com/apps. Note: app is for iPhone and iPod touch only.
Using the Table of Contents Controls and Indicators...1 iA5 Display...2 Getting Started ...3 Docking your iPhone/iPod ...4 Setting the Clock with Time Sync ...4 Setting the Clock Manually...5 Setting the Alarm ...6 Snooze ...7 Resetting the Alarm ...8 Bedtime Sleep Timer ... 8 Playing and Charging iPhone or iPod...9...
| auto sync clock sync button power/app button (press and hold to access product config screen from iHome+Sleep app homescreen when app is running) snooze/dimmer button + button (increase setting) wakeup button wakeup DC jack...
(active). To override this and keep the iA5 display on, exit the iHome+Sleep app then press the display on/auto button located on the back of the unit.
Getting Started 1.Plug the Ac adaptor into the DC jack on the back of the iA5 and the other end into a working outlet. 2.For battery backup, insert included CR2032 battery into battery compartment on the bottom of the unit. Make sure battery polarity (+/-) matches diagram.
The purpose of this mes- sage is to advise you that you must download the iHome+Sleep app to enjoy the enhanced features of the iA5. However, your iPhone or iPod will work properly with the iA5 even without the iHome+Sleep app installed.
Setting the Clock Manually 1.Press and hold the clock sync button located on the back of the unit until the display flashes. 2.Press the + and - buttons located on the front of the unit to adjust the time (hold the buttons to adjust rapidly. Make sure to set the correct AM or PM time (the pm indicator appears on the lower right of the display;...
Note: iPhone or iPod must be docked and in off mode (not playing) to wake to either. If no iPhone or iPod is detected, unit will default to buzzer alarm. Tip: use the iHome+Sleep app to unlock custom alarm settings. Using the...
Snooze 1.Press the snooze/dimmer button located on top of the unit while the alarm is sounding. The alarm will be silenced for 9 minutes (default) then come on again. 2.When alarm is NOT sounding, press and hold the snooze/dimmer button until the display flashes, then press the + and - buttons to program the snooze timer to a different interval (1 to 29 minutes).
2.Press the alarm button at any time to turn the alarm OFF. 3.Press the power/app button or the wakeup button when the alarm is sounding to power off the iA5 and reset the alarm to come on the next day at the same time.
Playing and Charging iPhone/iPod 1.Gently dock your playing iPhone or iPod. The iA5 will turn on and you will hear your audio. If the volume is too low, the unit may not detect your iPhone or iPod audio. If this occurs, press the power/app button to turn the unit on.
A Consumer Guide to Product Safety This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Consumer Product Safety Guide When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 15
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments – Do not use attachments not recommended by the product manufacturer.
2. Make sure you have the latest firmware (update via iTunes if needed). 3. Make sure you’re running the latest iHome+Sleep release (update via App Store if needed). 4. Reset iPhone or iPod touch For further information, visit www.ihomeaudio.com/apps or...
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.