Table of Contents
Advertisement
TouchPad
NOTE:
The TouchPad spare part kit includes the cable.
Description
TouchPad board with cable
IMPORTANT:
and replacement.
Before removing the TouchPad, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Bottom cover (see
c.
WLAN module(see
d.
Memory (see
e.
Fan (see
f.
System board (see
Remove the TouchPad bracket:
1.
Remove the six Phillips PM2×2.3 screws (1) that secure the TouchPad and TouchPad bracket to the
keyboard/top cover.
2.
Rotate the TouchPad bracket upward (2).
Make special note of each screw and screw lock size and location during removal
Battery on page
DVD±RW Double-Layer SuperMulti Drive on page
Bottom cover on page
WLAN module on page
Memory module on page
Fan on page
42).
System board on page
31), and then remove the following components:
34).
40).
39).
44).
Component replacement procedures
Spare part number
811580-001
32).
53
Advertisement
Table of Contents
