Table of Contents
Advertisement
6
Removal and replacement procedures for
Authorized Service Provider parts
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION:
Accessing these parts can damage the computer or void the warranty.
Component replacement procedures
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See
details.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
There are as many as 55 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal
and replacement.
DVD±RW Double-Layer SuperMulti Drive
Description
In blizzard white finish
In cobalt blue finish
In natural silver finish
In pretty pink finish
In sunset red finish
In "TKB" finish
In violet purple finish
Before removing the optical drive, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the optical drive:
32
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Components described in this chapter should only be accessed by an authorized service provider.
Battery on page
Locating system information on page 15
31).
for
Spare part number
810325-001
810322-001
810320-001
810323-001
810327-001
810321-001
810324-001
Advertisement
Table of Contents
