Table of Contents
Advertisement
Vlan Tag Insertion
Bridge Mode
WAN IP Network Settings
DHCP Client Identifier for
some ISP
Specify an IP address
MAC Address Setting
Vigor122 User's Guide
Check the box to enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Tag value – Type the value as the VLAN ID number. The range
is form 0 to 4095.
If you choose Bridged IP as the protocol, you can check this
box to invoke the function. The modem will work as a bridge
modem.
This group allows you to obtain an IP address automatically
and allows you type in IP address manually.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.
Modem Name – Type in the modem name provided by ISP.
Domain Name – Type in the domain name that you have
assigned.
This feature is offered for certain ISP with special request.
Enable – Check this box to enable the function of DHCP client
identifier for some ISP.
Username – Type a username used for such function.
Password – Type a password used for such function.
Click this radio button to specify some data.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP address
and check the Enable box. Then click OK to exit the dialog.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
Default MAC Address - Type in MAC address for the modem.
You can use Default MAC Address or specify another MAC
address for your necessity.
MAC Address – Type in the MAC address for the modem
manually.
23
Advertisement
Table of Contents
