Programmable Function Keys - Siemens HiPath 2000 User Manual

Getting to know your OpenStage phone

Programmable function keys

Your OpenStage 15 has eight illuminated keys to which you can assign
functions or numbers.
Depending on how they are programmed, you can use the keys as:
•
•
Each key can be programmed with one function.
Press the key briefly to activate the programmed function or dial the stored
number.
Hold the key to open the key programming menu
Your OpenStage is delivered with label strips. Write functions or names in
the white fields on the label strips.
The status of a function is shown by the LED on the corresponding func-
tion key.
Meaning of LED displays on function keys
LED
S
T
R
[1] In this manual, flashing keys are identified by this icon, regardless of the flashing interval.
18
Increase the number of programmable function keys by connecting
a key module
Peter Fox
Destinations?
Function key page 65
Repdial/Direct station selection key
The configuration of direct station selection keys must be activated
by your service personnel.
Direct station selection keys can be assigned an internal number
from the HiPath 4000 network.
Meaning of function key
Off The function is deactivated.
[1]
Flashing The function is in use.
On The function is activated.
The flashing interval represents different statuses, which are described in detail in the cor-
responding sections of the manual.
The programmable sensor keys on multi-line phones function as
trunk keys page 100.
page 16.
page 70
page 65.