1
2
1. Screwdriver
2. Brush holder cap
ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
•
Wool bonnet 180
•
Rubber pad 170
•
Lock nut 48
Use a screwdriver to remove the brush holder caps. Take out the worn carbon
003482
brushes, insert the new ones and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other mainte-
nance or adjustment should be performed by Makita Authorized Service Cent-
ers, always using Makita replacement parts.
•
Lock nut wrench 28
•
Wrench 17
•
Side grip (auxiliary handle)
7