Disassembly Instructions - Philips AZ5737 Service Manual

DISASSEMBLY INSTRUCTIONS

Dismantling of the Front Panel & Control board Assembly
1) Loosen 4 screws at back panel "A" & "B" and 2 screws at
bottom side "C" to remove the front panel assembly as
shown in figure 1, 2 & 3.
A
Figure 1
C
2) Lift up the tuning button with a sharp tool as shown in
figure 4.
Figure 4
4-1
B
Figure 2
Figure 3
3) Press the "Open/Close" button to open the DVD loader
door as shown in figure 5.
press
Figure 5
4) Loosen 4 screws "D" in figure 6 and press the bracket support in figure 7 to remove the control board assembly.
- 2 screws each on the left & right side
- each bracket support on the left & right side
D
Figure 6
5) Loosen 8 screws "E" as shown in figure 8 to remove the control board assembly.
4-1
press
Figure 7
Figure 8