Philips AZ5737 Service Manual page 10

Dismantling of the Tuner Board
1) Loosen 1 screw " F " which location close to tuning button
as shown in figure 9 .
2) Loosen 1 screw " G " inside the back panel as shown in
figure 10.
F
Figure 9
Figure 11
4-2
3) Loosen 1 screw "H" ground wire inside back panel as
shown in figure 11.
4) Loosen 2 screws "I" at tuner board assembly as shown in
figure 12.
G
Figure 10
I
Figure 12
Dismantling of the Tape Deck &Tape Board
1) Loosen 2 screw " K " and remove the support sheet as shown in figure 13.
2) Loosen 4 screw " J " at tape deck as shown in figure 14.
3) Loosen 1 screw " L " to remove the tape board assembly as shown in figure 15.
J
Figure 14
4-2
K
Figure 13
L
Figure 15