Suggested Sensor Selection Based On Application; Recommended Wire Sizes And Part Numbers - Honeywell SLATE Installation Instructions Manual

Configuration
Thermocouple J -50°C
K -50°C
RTD
NTC
Current Out
Voltage: In / Out
Table 7. Suggested Sensor Selection Based on Application.
Application
Communication
Lines
Other terminals
Table 8. Recommended Wire Sizes and Part Numbers.
Resistance to Temperature Conversion Tables
Below are the lookup tables for various types of SLATE sensors.
Linear interpolation is used for values that are between the points
that are shown.
10K NTC
Ohms
100.000
120.000
144.000
172.800
207.360
248.832
SLATE FUEL AIR RATIO MODULE
™
R8001C6001
Min Optimum Range for Performance Max
-135°C
25°C
4 mA
2 V
Recommended Wire
Size
22 AWG two-wire
twisted pair with ground,
or five-wire.
18 AWG wire insulated
for voltages and
temperatures for given
application.
Recommended
Part Numbers
Belden 8723
shielded cable or
equivalent.
TTW60C,
THW75C,
THHN90C
Degrees C
228.199
214.979
202.439
190.526
179.195
168.404
1025°C ± 4 °C
1000°C ± 4 °C
250°C ± 2 °C
125°C ± 1°C
20 mA ± .05 mA
10 V 0.3 %,
typical
15