P l a n n i n g
Planning Form Instructions
Complete the "Button Diagram" section of each copy of the following forms:
System Form 4b, Analog Multiline Telephone
System Form 4d, MLX Telephone
System Form 4e, MFM Adjunct-MLX Telephone
System Form 4f, Tip/Ring Equipment
System Form 5a, Direct-Line Console (DLC)-Analog
System Form 5b, Direct-Line Console (DLC)-Digits/
System Form 5c, MFM Adjunct-DLC
If assigning BRI Access buttons (Key or Hybrid/PBX mode), write "BRI Access"
on the appropriate buttons (1 through 10):
NOTE:
A BRI Access button cannot be assigned to a QCC. Therefore, no entries are
required on System Form 5d, Queued Cal/Console (QCC).
Features
Assigning telephone, operator, group-assigned, and system features for a
MERLIN LEGEND BRI system is the same as for other releases of the MERLIN
LEGEND system. Refer to the System Planning guide (#555-620-112) for
complete planning instructions.
Features
4-15