Remote Controls - Blaupunkt Montevideo 4010 DVD Operating And Installation Instructions

Remote Controls

Power on/off: Press
off the unit.
4
1. Zoom (DVD/VCD only)
to turn on/
2. Title (DVD only)
3. Power on/off
4. Setup
5. Menu cursor
6. Enter
7. Program
8. Digit area
9. - Short press to select audio menu, and
rotate the knob to adjust level.
- Long press to enter into setting menu,
then each press changes the mode.
10. Volume
11. Mute
12. - Radio tune
- Track skip/seek
13. Subtitle (DVD only)
14. - Radio
- Disc (when disc inserted)
- Card (when SD/MMC inserted)
- USB (when USB inserted)
- AUX-IN
15. Repeat
16. Repeat A-B
17. Stop/Return
18. Play/Pause
19. Goto search
20. - DVD menu
- PBC (for VCD 2.0 or up)
21. - OSD: On screen display
- AMS: Radio preset scan / Radio auto
preset
22. - DVD audio
- VCD audio L/R/ST
23. - Short press to switch to clock display,
press again to exit.
- Long press to enter clock setting.
- Return to previous menu (Setting menu)
24. Angle (DVD only)
25. - Video system NTSC/PAL 60/PAL/AUTO
- Radio band (in Radio mode)
Replacing the lithium battery of
remote control unit.
When the range of operation of the card
remote control becomes short or no function,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.
1. Pull out the battery holder while pressing
the stopper.
2. Insert the button-type lithium battery with
the (+) mark facing upward. Insert the bat-
tery holder into the remote control.
1 2
(CR 2025)