Setting The Fabric In The Embroidery Hoop - ELNA eXpressive 970 Instruction Manual

z
y
x t
c
v
o
b
n
i
m
q
e
w
r
u
i
o
i
t

Setting the Fabric in the Embroidery Hoop

z Attach stabilizer to the wrong side of the fabric.
Mark the centerlines for pattern placement on the right
side of the fabric.
q Fabric
w Centerlines
e Stabilizer
CAUTION:
Thick and hard materials such as multi-layer canvas
may cause needle to warp or break.
x Place the inner hoop with the template on the fabric.
Make sure that the arrow marks on the hoop and
template are facing away from you.
Align the centerlines on the fabric and template.
r Inner hoop
t Template
y Arrow mark
c Loosen the hoop tightening screw on the outer hoop.
u Outer hoop
i Hoop tightening screw
v Hold the inner hoop and fabric together and push
them into the outer hoop. Make sure to keep the
centerlines aligned.
Do not push the setting plates. Push the 4 corners of
the inner hoop.
o Setting plate
b Tighten the hoop tightening screw slightly. Pull the
edge of the fabric to stretch it drum-tight.
i Hoop tightening screw
NOTE:
Make sure the bottom of the inner hoop is level with
the outer hoop.
n Tighten the hoop tightening screw securely.
i Hoop tightening screw
m Remove the template.
t Template
22