Advanced Operation With The Optional Rcs Unit Selecting The Embroidery Patterns - ELNA eXpressive 970 Instruction Manual

z
Keep hand clear.
Carriage will now move to set position.
x
Resume last pattern?
c
Edit
ADVANCED OPERATION WITH THE
OPTIONAL RCS UNIT
Selecting the Embroidery Patterns
When turning the power on, the LCD touch panel will
show the opening window, then a warning message will
appear after a few seconds.
z Press the OK key and the carriage will move to the
q
home position. Keep your hands clear of the moving
parts.
q OK key
x The LCD touch panel will show a prompt asking you
to resume the last pattern or not.
Press the OK key, if you wish to continue sewing the
last pattern used before you turned the power off.
Or press the exit key (X) to start a new project.
w
w Exit key (X)
When you press the exit key (X), the LCD touch panel
will show the pattern selection window of the built-in
q
designs.
e
c To select the monogramming or editing mode, press
the function key next to the monogram or editing icon.
e Function key (monogram)
r Function key (editing)
r
In the monogramming mode, you can select 10 styles of
fonts, 2-letters, 3-letters, border patterns and normal sew
patterns.
In the editing mode, you can modify and combine
embroidery patterns.
37