Deleting A Waypoint From A Flight Plan; Deleting Flight Plans - Honeywell KLN 900s Pilot's Manual

4.1.4 Deleting A Waypoint From A Flight Plan

To delete a waypoint from a flight plan:
1. Press the left C to enable the left cursor function if it
is not on already.
2. Rotate the left outer knob as necessary to position the
cursor over the waypoint to be deleted (figure 4-19).
3. Press F. The letters DEL (delete) will appear to the
left of the identifier and a question mark will appear to
the right of the identifier (figure 4-20). If a mistake was
made and you do not wish to delete this waypoint,
press F.
4. Press E and the waypoint will be deleted from the
flight plan. The other waypoints in the flight plan will
be correctly repositioned (figure 4-21).
5. Press the left C to turn off the left cursor function.

4.1.5 Deleting Flight Plans

To delete a flight plan which is no longer required:
1. Display the flight plan (FPL 0, FPL 1, FPL 2,..., or FPL
25) which is to be cleared (figure 4-22).
2. Make sure the left cursor function is turned off. If the
left cursor is on, press the left C to turn it off.
3. Press F. The words DELETE FPL? will appear at
the top of the page (figure 4-23). If a mistake was
made and you do not wish to clear this flight plan,
press F.
4. Press E to clear the flight plan (figure 4-24).
NOTE: If there is no Direct-To waypoint and you delete
FPL 0, navigation will be flagged (i.e. disabled).
1:KNEW
2:GPT
3:BUGLE
4:SJI
9:KPIE
CRSR
Figure 4-19
USE? INVRT?|
FPL 8
DELETE FPL?|
1:KMKC
2:BUM
3:OSW
4:TUL
6:KRVS
CRSR
Figure 4-23
4-5
| USE? INVRT?|
| 1:KNEW
| 2:GPT
| DEL BUGLE?
| 4:SJI
| 9:KPIE
CRSR
Figure 4-20
|
1:KNEW |
2:GPT |
3:SJI |
4:CEW |
8:KPIE |
CRSR
Figure 4-21
1:KMKC |
2:BUM |
3:OSW |
4:TUL |
6:KRVS |
Figure 4-22
LOAD FPL 0?|
1:
|
|
|
|
|
FPL 8
Figure 4-24
|
|
|
|
|
|
|
|
|
|
Rev 2