Honeywell KLN 900s Pilot's Manual page 187

4. Select the "RECEIVE DATA" option and press E on
the unit which is to receive the flight plans and user way-
points. The SET 10 page will appear as shown in Figure
8-5.
NOTE: The F key will cancel the operation and step
back to the previous page.
5. If it is OK to overwrite the flight plans and user way-
points on the receiving unit, press E to ACKNOWL-
EDGE the warning on the receiving unit. The SET 10
page will then appear as shown in Figure 8-6.
6. Then, once a connection with the other unit is estab-
lished the SET 10 pages on both units will appear as
shown in Figure 8-7.
7. Once the flight plan and user waypoint data has been
successfully transferred, the SET 10 pages on both units
will appear as shown in Figure 8-8.
8. The receiving unit will then display the message
shown in figure 8-9. Simply press E to acknowledge
this message.
THIS UNIT TO
RECEIVE USER DATA
USER DATA WILL
BE OVERWRITTEN
ACKNOWLEGE?
CRSR
THIS UNIT TO
RECEIVE USER DATA
ESTABLISHING
CONNECTION...
SET10
USER DATA TRANSFER
IN PROGRESS...
SET10
USER DATA HAS BEEN
SUCCESSFULLY...
TRANSFERRED
ACKNOWLEGE?
CRSR
KLN 900 WILL RESET
ITSELF TO USE NEW
USER DATA.
ACKNOWLEGE?
CRSR
8-2
ent CRSR
Figure 8-5
CRSR
Figure 8-6
CRSR
Figure 8-7
ent CRSR
Figure 8-8
ent CRSR
Figure 8-9
Rev 2