Monitor Menu - Sharp PN-R556 Operation Manual

Controlling the Monitor with a PC (RS-232C)
Function
ID SETTING ID NO.SETTING
ID NO. SETTING
(ONCE)
ID NO. SETTING
(SUBSEQUENT)
ID CHECK
ID DISPLAY
REMOTE No.
COPY SETTING SETTING COPY
VALUE MODE
SETTING COPY
TARGET
SUPPLY USB POWER

MONITOR menu

Function
PORTRAIT/LANDSCAPE INSTALL
HORIZONTAL INSTALLATION
ROTATE 180°
OSD H-POSITION
OSD V-POSITION
POWER SAVE MODE
OFF IF NO SET
OPERATION
TIME
POWER ON DELAY SET
INTERVAL
SELF ADJUST SELF ADJUST
START TIMING
42
E
Command Direction Parameter
IDST W 0-255
R
IDSL W 1-255
0
IDLK W 1-255
0
IDCK W 0 ID
IDLK
IDDP W 0-2
RCNO WR 0-9
CPMD WR 0
1-255
CPTG WR 0
1
PWSP WR 0-1
Command Direction Parameter
STDR WR 0-1
MLAY WR 0-2
PFIL WR 0, 3
OSDH WR 0-100
OSDV WR 0-100
STBM WR 0-1
ATOF WR 0-1
AOFT WR 1-12
PODS WR 0-1
PWOD WR 1-60
AADJ WR 0-1
AADD WR 10-200
Reply Control/Response contents
Sets the monitor's ID number. ("0" means "no ID number".)
0-255 Returns the monitor's ID number.
Sets a monitor ID number.
This ID number is only effective for the command immediately after this command.
Clears the ID number if one has been designated.
Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands after this
command.
Clears the ID number if one has been designated.
: xxx Displays monitor's own ID number and the selected ID number on the screen.
: yyy
0: OFF, 1: ON, 2: ON (turns OFF after 4 sec.)
(The IP address and MAC address are both displayed.)
0-9 Sets the number of the remote control to operate.
0 Copy to all monitors.
1-255 Copy to the monitor with the set ID Number.
0 Copies the PICTURE menu settings.
1 Copies all the settings.
0-1 0: POWER ON ONLY, 1: ALWAYS
Reply Control/Response contents
0-1 0: LANDSCAPE, 1: PORTRAIT
0-2 0: OFF, 1: UPWARD, 2: DOWNWARD
0, 3 0: OFF, 3: ON
"ERR" when PIP MODES is a value other than OFF.
0-100 "ERR" when PORTRAIT/LANDSCAPE INSTALL is set to PORTRAIT.
0-100
0-1 0: OFF, 1: ON
"ERR" when SUPPLY USB POWER is set to ALWAYS.
0-1 0: OFF, 1: ON
1-12 1-12 hours
0-1 0: OFF, 1: ON
1-60 1-60: seconds
0-1 0: OFF, 1: ON
10-200 10: 1 second through 200: 20 seconds
*
○
-
○
-
*
○