3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
NB17A*/NB19A* monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions : 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
3. R/Cover opening jig : BH81-00001A
(NB17A*)
NB17A*/NB19A*
1. Place monitor face down on cushioned table.
Remove 2 screws from grip on the stand and
remove signal cable.
(CAUTION : Remove screw grip don't on the
stand than fall the stand from the top side of
the foot.)
2. Remove front cover and remove back cover.
3. Remove 2 screws shield TCO and remove 1
screw shield power.
(NB19A*)
4. Remove casket tape and disconnect function
cable, inverter cable.
3-1